|
|
| Part: 28PG-LC-SD |
1 of 6 |
News Flash |
| Products: |
PLCC-and-PGA-to-PLCC-and-LCC-adapters |
| Package-type: |
PLCC |
| Package-pin-count: |
28-pins |
| Emulator-plug: |
28-PGA |
| Horizontal-footprint: |
28-PLCC-socket |
| Price: |
$140.00 |
| Availability: |
stock |
| Indexed: |
01-01-2000 |
|
|
| Description: 28-PGA-to-LCC adapter used with emulator pods with PGA plug for increased connection reliability and higher emulator pod stability on targets with PLCC or LCC pads for the package or surface mount PLCC socket. The adapter has a two-part construction. The bo |
| [Photos] |
| Part: 28PG-PL |
2 of 6 |
News Flash |
| Products: |
PLCC-and-PGA-to-PLCC-and-LCC-adapters |
| Package-type: |
PLCC |
| Package-pin-count: |
28-pins |
| Emulator-plug: |
28-PGA |
| Horizontal-footprint: |
28-PLCC-socket |
| Price: |
$110.00 |
| Availability: |
stock |
| Indexed: |
01-01-2000 |
|
|
| Description: 28-PGA-to-PLCC adapter is used with emulators with PGA plug. This emulator adapter increases pod clearance by 700 mils. Normal production PLCC sockets are rated at 25-30 insertions of a PLCC package. Aprilog.com's PLCC plugs can be inserted into the same production PLCC sockets over a 1000 times without any damage to those sockets. |
| [Photos] |
| Part: 28PL-LC-SD |
3 of 6 |
News Flash |
| Products: |
PLCC-and-PGA-to-PLCC-and-LCC-adapters |
| Package-type: |
PLCC |
| Package-pin-count: |
28-pins |
| Emulator-plug: |
28-PLCC |
| Horizontal-footprint: |
28-PLCC-socket |
| Price: |
$145.00 |
| Availability: |
stock |
| Indexed: |
01-01-2000 |
|
|
| Description: 28-PLCC-to-LCC adapter used for increased connection reliability and higher emulator pod stability on targets with PLCC or LCC pads for the package or surface mount PLCC socket. The adapter has a two-part construction. The bottom part, LCC base with male pins, replaces PLCC package or PLCC socket on the pads - it is soldered to those pads. The top part, emulator attachment, has 500 mil high female connector matching that on the base. Both connectors have gold plated contacts. Additional bases can be purchased at any time. Emulator pod clearance is increased by 800 mils. |
| [Photos] |
| Part: 28PL-PL |
4 of 6 |
News Flash |
| Products: |
PLCC-and-PGA-to-PLCC-and-LCC-adapters |
| Package-type: |
PLCC |
| Package-pin-count: |
28-pins |
| Emulator-plug: |
28-PLCC |
| Horizontal-footprint: |
28-PLCC-socket |
| Price: |
$115.00 |
| Availability: |
stock |
| Indexed: |
01-01-2000 |
|
|
| Description: 28-PLCC-to-PLCC adapter used for increasing emulator pod clearance (by 800 mils) and/or for testing of boards with a known good chip or a with a chip with test program. Normal production PLCC sockets are rated at 25-30 insertions of a PLCC package. Aprilog.com's PLCC plugs can be inserted into the same production PLCC sockets over a 1000 times without any damage to those sockets. |
| [Photos] |
| Part: 44PL-28LC-SD-T89C51CC01-02 |
5 of 6 |
News Flash |
| Products: |
PLCC-and-PGA-to-PLCC-and-LCC-adapters |
| Package-type: |
PLCC |
| Package-pin-count: |
28-pins |
| Emulator-plug: |
44-PLCC |
| Horizontal-footprint: |
44-PLCC-socket |
| Price: |
$180.00 |
| Availability: |
stock |
| Indexed: |
01-01-2000 |
|
|
| Description: T89C51CC01 emulators with 44-pin PLCC socket and 28-pin LCC base can be used for emulation of T89C51CC02 Atmel microcontrollers on targets with pads 28-PLCC package or surface mount socket.This adapter is used when extra contact reliablity is required or when a surface mount PLCC socket cannot provide the requied stability. |
|
| [Photos] |
| Part: 44PL-28PL-T89C51CC01-02 |
6 of 6 |
News Flash |
| Products: |
PLCC-and-PGA-to-PLCC-and-LCC-adapters |
| Package-type: |
PLCC |
| Package-pin-count: |
28-pins |
| Emulator-plug: |
44-PLCC |
| Horizontal-footprint: |
44-PLCC-socket |
| Price: |
$140.00 |
| Availability: |
stock |
| Indexed: |
01-01-2000 |
|
|
| Description: T89C51CC01 emulators with 44-pin PLCC socket and 28-pin PLCC plug can be used for emulation of T89C51CC02 Atmel microcontrollers on targets with 28-PLCC socket. |
|
| [Photos] |
|
|