| Part: 44PG-QFS31-SD |
1 of 38 |
News Flash |
| Products: |
PGA-and-PLCC-to-QFP-pads-Adapters |
| Package-type: |
QFP-TQFP |
| Package-pin-count: |
44-pins |
| Lead-pitch: |
0.8mm |
| Package-tip-to-tip: |
12.0-to-12.6mm |
| Emulator-plug: |
44-PGA |
| Horizontal-footprint: |
44-PLCC-socket |
| Vertical-clearance: |
450-mils |
| Price: |
$180.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Nohau emulators with PGA plugs can be connected to TQFP pads. For all 80C51 (inclusive of 80C251 & 80C51XA) microcontrollers in 44-lead TQFP package. Wired one-to-one (generic) Two-part adapter. The bottom part (base with male pins) is for soldering to TQFP pads on the target. The top part (with 500 mil high female connector) is for attachment to the emulator plug. Additional bases can be purchased at any time. Base part number is 44QFS31-SD. |
|
| [Photos|Selection-guides] |
| Part: 44PG-QFS31B-SD |
2 of 38 |
News Flash |
| Products: |
PGA-and-PLCC-to-QFP-pads-Adapters |
| Package-type: |
QFP |
| Package-pin-count: |
44-pins |
| Lead-pitch: |
0.8mm |
| Package-tip-to-tip: |
13.2mm |
| Emulator-plug: |
44-PGA |
| Horizontal-footprint: |
44-PLCC-socket |
| Vertical-clearance: |
450-mils |
| Price: |
$180.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Nohau emulators with PGA plugs can be connected to QFP. For all 80C51 (inclusive of 80C251 & 80C51XA), Motorola 68HC11 and other microcontrollers in 44-lead QFP package microcontrollers in 44-lead QFP package. Wired one-to-one (generic) Two-part adapter. The bottom part (base with male pins) is for soldering to QFP pads on the target. The top part (with 500 mil high female connector) is for attachment to the emulator plug. Additional bases can be purchased at any time. Base part number is 44QFS31B-SD. |
|
| [Photos|Selection-guides] |
| Part: 44PL-32QFS31-SD-AT89C51CC01-02 |
3 of 38 |
News Flash |
| Products: |
PGA-and-PLCC-to-QFP-pads-Adapters |
| Package-type: |
QFP |
| Package-pin-count: |
32-pins |
| Lead-pitch: |
0.8mm |
| Package-tip-to-tip: |
9.0mm |
| Emulator-plug: |
44-PLCC |
| Horizontal-footprint: |
44-PLCC-socket |
| Vertical-clearance: |
450-mils |
| Price: |
$140.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: T89C51CC01 emulators with 44-pin PLCC socket and 32-pin QFP base can be used for emulation of T89C51CC02 Atmel microcontrollers on targets with pads 32-QFP package. Two part adapter. Additional bases (bottom parts for soldering to the target pads), part number 32QFS31-SD can be purchased. |
|
| [Photos|Selection-guides] |
| Part: 44PL-QFS31-SD |
4 of 38 |
News Flash |
| Products: |
PGA-and-PLCC-to-QFP-pads-Adapters |
| Package-type: |
QFP-TQFP |
| Package-pin-count: |
44-pins |
| Lead-pitch: |
0.8mm |
| Package-tip-to-tip: |
12.0-to-12.6mm |
| Emulator-plug: |
44-PLCC |
| Horizontal-footprint: |
44-PLCC-socket |
| Vertical-clearance: |
450-mils |
| Price: |
$185.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Generic emulator adapter for emulators with PLCC plugs can be connected to TQFP pads. For all 80C51 (inclusive of 80C251 & 80C51XA) microcontrollers in 44-lead TQFP package. Wired one-to-one (generic). Two-part adapter. The bottom part (base with male pins) is for soldering to QFP pads on the target. The top part (with 500 mil high female connector) is for attachment to the emulator plug. Additional bases can be purchased at any time. Base part number is 44QFS31-SD. |
|
| [Photos|Selection-guides] |
| Part: 44PL-QFS31B-SD |
5 of 38 |
News Flash |
| Products: |
PGA-and-PLCC-to-QFP-pads-Adapters |
| Package-type: |
QFP |
| Package-pin-count: |
44-pins |
| Lead-pitch: |
0.8mm |
| Package-tip-to-tip: |
13.2mm |
| Emulator-plug: |
44-PLCC |
| Horizontal-footprint: |
44-PLCC-socket |
| Vertical-clearance: |
450-mils |
| Price: |
$185.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Generic emulator adapter for emulators with PLCC plugs can be connected to QFP pads. For all Motorola 68HC05, 68HC08, 68HC11 and other microcontrollers in 44-lead QFP package. Wired one-to-one. Two-part adapter. The bottom part (base with male pins) is for soldering to QFP pads on the target. The top part (with 500 mil high female connector) is for attachment to the emulator plug. Additional bases can be purchased at any time. Base part number is 44QFS31B-SD. |
|
| [Photos|Selection-guides] |
| Part: 52PG-44QFS31-SD-80C530-80C520 |
6 of 38 |
News Flash |
| Products: |
PGA-and-PLCC-to-QFP-pads-Adapters |
| Package-type: |
QFP |
| Package-pin-count: |
44-pins |
| Lead-pitch: |
0.8mm |
| Emulator-plug: |
52-PGA |
| Horizontal-footprint: |
52-PLCC-socket |
| Vertical-clearance: |
450-mils |
| Price: |
$205.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Nohau emulator for 80C530 emulators with 52-pin PGA plug can be connected to 44-lead QFP pads for 80C520. Two-part adapter. The bottom part (base with male pins) is for soldering to QFP pads on the target. The top part (with 500 mil high female connector) is for attachment to the emulator plug. Additional bases can be purchased at any time. Base part number is 44QFS31-SD. |
| [Photos|Selection-guides] |
| Part: 52PG-64QF20-SD-AT89C5131 |
7 of 38 |
News Flash |
| Products: |
PGA-and-PLCC-to-QFP-pads-Adapters |
| Package-type: |
TQFP |
| Package-pin-count: |
64-pins |
| Lead-pitch: |
0.5mm |
| Package-tip-to-tip: |
12.0mm |
| Emulator-plug: |
52-PGA |
| Horizontal-footprint: |
52-PLCC-socket |
| Vertical-clearance: |
450-mils |
| Price: |
$296.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: 52-PGA to 64-TQFP adapter for Nohau emulator for Atmel's AT89C5131microcontroller in 64-lead TQFP package. Two-part adapter. The bottom part (64-TQFP base with male pins) is for soldering to TQFP pads on the target. The top part (with 500 mil high female connector) is for attachment to the emulator plug with a female connector matching the male pins on the TQFP base. Additional TQFP bases can be purchased at any time. 64-TQFP base part number is 64QFS20-SD. |
|
| [Photos|Selection-guides] |
| Part: 52PG-64QFS31-SD-68HC11 |
8 of 38 |
News Flash |
| Products: |
PGA-and-PLCC-to-QFP-pads-Adapters |
| Package-type: |
QFP |
| Package-pin-count: |
64-pins |
| Lead-pitch: |
0.8mm |
| Emulator-plug: |
52-PGA |
| Horizontal-footprint: |
52-PLCC-socket |
| Vertical-clearance: |
450-mils |
| Price: |
$225.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Motorola 68HC11E9 microcontroller emulator adapter for Nohau's Emul68-PC which enables the emulator to be used on targets with pads for a 64-pin QFP package. |
|
| [Photos|Selection-guides] |
| Part: 52PL-44QFS31-SD-80C530-80C520 |
9 of 38 |
News Flash |
| Products: |
PGA-and-PLCC-to-QFP-pads-Adapters |
| Package-type: |
QFP |
| Package-pin-count: |
44-pins |
| Lead-pitch: |
0.8mm |
| Emulator-plug: |
52-PLCC |
| Horizontal-footprint: |
52-PLCC-socket |
| Vertical-clearance: |
450-mils |
| Price: |
$205.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Nohau emulator for 80C530 emulators with 52-pin PGA plug can be connected to 44-lead QFP pads for 80C520. Two-part adapter. The bottom part (base with male pins) is for soldering to QFP pads on the target. The top part (with 500 mil high female connector) is for attachment to the emulator plug. Additional bases can be purchased at any time. Base part number is 44QFS31-SD. |
| Cross-Reference: |
| Manfs.: |
| Development-Tools: Emul51 |
| Manfs.: Nohau |
|
| [Photos|Selection-guides] |
| Part: 52PL-64QF20-SD-AT89C5131 |
10 of 38 |
News Flash |
| Products: |
PGA-and-PLCC-to-QFP-pads-Adapters |
| Package-type: |
TQFP |
| Package-pin-count: |
64-pins |
| Lead-pitch: |
0.5mm |
| Package-tip-to-tip: |
12.0mm |
| Emulator-plug: |
52-PLCC |
| Horizontal-footprint: |
52-PLCC-socket |
| Vertical-clearance: |
450-mils |
| Price: |
$296.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: 52-PLCC to 64-TQFP adapter for emulators for Atmel's AT89C5131microcontroller in 64-lead TQFP package. Two-part adapter. The bottom part (64-TQFP base with male pins) is for soldering to TQFP pads on the target. The top part (with 500 mil high female connector) is for attachment to the emulator plug with a female connector matching the male pins on the TQFP base. Additional TQFP bases can be purchased at any time. 64-TQFP base part number is 64QFS20-SD. |
| [Photos|Selection-guides] |
|
emulator-adapter.com 
