|
|
| Part: 44PG-QFS31-SD |
1 of 11 |
News Flash |
| Products: |
PGA-and-PLCC-to-QFP-pads-Adapters |
| Package-type: |
QFP-TQFP |
| Package-pin-count: |
44-pins |
| Lead-pitch: |
0.8mm |
| Package-tip-to-tip: |
12.0-to-12.6mm |
| Emulator-plug: |
44-PGA |
| Horizontal-footprint: |
44-PLCC-socket |
| Vertical-clearance: |
450-mils |
| Price: |
$180.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Nohau emulators with PGA plugs can be connected to TQFP pads. For all 80C51 (inclusive of 80C251 & 80C51XA) microcontrollers in 44-lead TQFP package. Wired one-to-one (generic) Two-part adapter. The bottom part (base with male pins) is for soldering to TQFP pads on the target. The top part (with 500 mil high female connector) is for attachment to the emulator plug. Additional bases can be purchased at any time. Base part number is 44QFS31-SD. |
| Development-Tools: Emul51 |
| Manfs.: Nohau |
|
| [Photos|Selection-guides] |
| Part: 44PG-QFS31B-SD |
2 of 11 |
News Flash |
| Products: |
PGA-and-PLCC-to-QFP-pads-Adapters |
| Package-type: |
QFP |
| Package-pin-count: |
44-pins |
| Lead-pitch: |
0.8mm |
| Package-tip-to-tip: |
13.2mm |
| Emulator-plug: |
44-PGA |
| Horizontal-footprint: |
44-PLCC-socket |
| Vertical-clearance: |
450-mils |
| Price: |
$180.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Nohau emulators with PGA plugs can be connected to QFP. For all 80C51 (inclusive of 80C251 & 80C51XA), Motorola 68HC11 and other microcontrollers in 44-lead QFP package microcontrollers in 44-lead QFP package. Wired one-to-one (generic) Two-part adapter. The bottom part (base with male pins) is for soldering to QFP pads on the target. The top part (with 500 mil high female connector) is for attachment to the emulator plug. Additional bases can be purchased at any time. Base part number is 44QFS31B-SD. |
| Development-Tools: Emul51 |
| Manfs.: Nohau |
|
| [Photos|Selection-guides] |
| Part: 52PG-64QF20-SD-AT89C5131 |
3 of 11 |
News Flash |
| Products: |
PGA-and-PLCC-to-QFP-pads-Adapters |
| Package-type: |
TQFP |
| Package-pin-count: |
64-pins |
| Lead-pitch: |
0.5mm |
| Package-tip-to-tip: |
12.0mm |
| Emulator-plug: |
52-PGA |
| Horizontal-footprint: |
52-PLCC-socket |
| Vertical-clearance: |
450-mils |
| Price: |
$296.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: 52-PGA to 64-TQFP adapter for Nohau emulator for Atmel's AT89C5131microcontroller in 64-lead TQFP package. Two-part adapter. The bottom part (64-TQFP base with male pins) is for soldering to TQFP pads on the target. The top part (with 500 mil high female connector) is for attachment to the emulator plug with a female connector matching the male pins on the TQFP base. Additional TQFP bases can be purchased at any time. 64-TQFP base part number is 64QFS20-SD. |
| Development-Tools: Emul51 |
| Manfs.: Nohau |
|
| [Photos|Selection-guides] |
| Part: 52PL-44QFS31-SD-80C530-80C520 |
4 of 11 |
News Flash |
| Products: |
PGA-and-PLCC-to-QFP-pads-Adapters |
| Package-type: |
QFP |
| Package-pin-count: |
44-pins |
| Lead-pitch: |
0.8mm |
| Emulator-plug: |
52-PLCC |
| Horizontal-footprint: |
52-PLCC-socket |
| Vertical-clearance: |
450-mils |
| Price: |
$235.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Nohau emulator for 80C530 emulators with 52-pin PGA plug can be connected to 44-lead QFP pads for 80C520. Two-part adapter. The bottom part (base with male pins) is for soldering to QFP pads on the target. The top part (with 500 mil high female connector) is for attachment to the emulator plug. Additional bases can be purchased at any time. Base part number is 44QFS31-SD. |
| Cross-Reference: |
| Manfs.: |
| Development-Tools: Emul51 |
| Manfs.: Nohau |
|
| [Photos|Selection-guides] |
| Part: 68PL-64QFS20-SD-80C390 |
5 of 11 |
News Flash |
| Products: |
PGA-and-PLCC-to-QFP-pads-Adapters |
| Package-type: |
TQFP |
| Package-pin-count: |
64-pins |
| Lead-pitch: |
0.5mm |
| Emulator-plug: |
68-PLCC |
| Horizontal-footprint: |
68-PLCC-socket |
| Vertical-clearance: |
450-mils |
| Price: |
$350.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Dallas Semiconductor 80C390 emulator adapter matches emulators with 68-lead PLCC plugs to 64-lead TQFP target pads. Two-part adapter. The bottom part of the emulator adapter (base with male pins) is for soldering to TQFP pads on the target. The top part with 68-PLCC socket is for attachment to the emulator plug. Additional bases (part number 64QFS20-SD) can be purchased at any time. |
|
| [Photos|Selection-guides] |
| Part: 68PL-64QFS31-SD-68HC11F1 |
6 of 11 |
News Flash |
| Products: |
PGA-and-PLCC-to-QFP-pads-Adapters |
| Package-type: |
QFP |
| Package-pin-count: |
64-pins |
| Lead-pitch: |
0.8mm |
| Emulator-plug: |
68-PLCC |
| Horizontal-footprint: |
68-PLCC-socket |
| Vertical-clearance: |
450-mils |
| Price: |
$350.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Motorola 68HC11F1 emulator adapter enables an emulator with a 68-pin PLCC plug to be used on a target with a 64-QFP pads. The emulator adapter is made of two parts: SMT base (which can be purchased separately) and emulator attachment. The same looking emulator adapters (different connections) are available for many other microcontrollers in this QFP package. |
|
| [Photos|Selection-guides] |
| Part: 68PL-64QFS31-SD-68HC11L6 |
7 of 11 |
News Flash |
| Products: |
PGA-and-PLCC-to-QFP-pads-Adapters |
| Package-type: |
QFP |
| Package-pin-count: |
64-pins |
| Lead-pitch: |
0.8mm |
| Emulator-plug: |
68-PLCC |
| Horizontal-footprint: |
68-PLCC-socket |
| Vertical-clearance: |
450-mils |
| Price: |
$350.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Motorola 68HC11L6 emulator adapter enables an emulator with a 68-pin PLCC plug to be used on a target with a 64-QFP pads. The emulator adapter is made of two parts: SMT base (which can be purchased separately) and emulator attachment. The same looking emulator adapters (different connections) are available for many other microcontrollers in this QFP package. |
|
| [Photos|Selection-guides] |
| Part: 68PL-80QFR31-SD-80C550 |
8 of 11 |
News Flash |
| Products: |
PGA-and-PLCC-to-QFP-pads-Adapters |
| Package-type: |
QFP |
| Package-pin-count: |
80-pins |
| Lead-pitch: |
0.8mm |
| Emulator-plug: |
68-PLCC |
| Horizontal-footprint: |
68-PLCC-socket |
| Vertical-clearance: |
450-mils |
| Price: |
$350.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Dallas Semiconductor D80C550 emulator adapter for emulators with 68-PLCC plug for connection to QFP pads on the target. The emulator adapter is made in two parts. The bottom part (base) replaces the package on the target's pads. Additional bases can be purchased at any time. The same looking emulator adapters (different connections) are available for many other microcontrollers in this QFP package. |
|
| [Photos|Selection-guides] |
| Part: 68PL-80QFS26-SD-80C515A |
9 of 11 |
News Flash |
| Products: |
PGA-and-PLCC-to-QFP-pads-Adapters |
| Package-type: |
QFP |
| Package-pin-count: |
80-pins |
| Lead-pitch: |
0.65mm |
| Emulator-plug: |
68-PLCC |
| Horizontal-footprint: |
68-PLCC-socket |
| Vertical-clearance: |
450-mils |
| Price: |
$350.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Infineon 80C515A emulator adapter enables an emulator with a 68-pin PLCC plug to be used on a target with a 80-QFP pads. The emulator adapter is made of two parts: SMT base (which can be purchased separately) and emulator attachment. The same looking emulator adapters (different connections) are available for many other microcontrollers in this QFP package. |
|
| [Photos|Selection-guides] |
| Part: 84PG-80QFS26-SD-80C517A-515A |
10 of 11 |
News Flash |
| Products: |
PGA-and-PLCC-to-QFP-pads-Adapters |
| Package-type: |
QFP |
| Package-pin-count: |
80-pins |
| Lead-pitch: |
0.65mm |
| Emulator-plug: |
84-PGA |
| Horizontal-footprint: |
84-PLCC-socket |
| Vertical-clearance: |
450-mils |
| Price: |
$360.00 |
| Availability: |
1-day |
| Indexed: |
01-01-2000 |
|
|
| Description: Infineon 80C515A and 80C535A emulator adapter with 84-pin PGA socket for connection to 80-lead QFP target pads for 80C515A & 80C535A microcontrollers for use with Nohau 80C517A and 80C537A emulators. Hence, one pod can be used for 80C517A as well as for 80C5151A. Two-part adapter. The bottom part of the emulator adapter (base with male pins) is for soldering to QFP pads on the target. The top part of the emulator adapter is for attachment to the emulator plug. Additional bases can be purchased at any time. The same adapter as 84PL/80QFS26-SD-517A/535A. Can be ordered under either part number. |
|
| [Photos|Selection-guides] |
|
|
emulator-adapter.com 
